abrahamsson Door Knob May 16th, 2018 - 10:21:16
This is because passage doors do not require high level of security. The use of dummy knobs are also visible on several houses. These do not have locking system rather a magnet to hold the door closed. These types of knobs are used for closets of the house. The most important thing that should be kept in mind is that inside knobs should be comfortable to use and focused on convenience in our house. So we have seen that inside door levers are not as easy to select as they appear to be. We need to look for a number of properties to make these knobs appropriate for our house.
When door knob operates properly right carefully tightening the screws on your knob and also the latch assembly. At this time install the strike plate located on the door facing simply by being certain that it fits in the slot properly and installing the screws. Gradually examine the door and then make any necessary modifications. Straightforward work saving tip; Be sure you turn the latching mechanism as well as the latch the appropriate direction to begin with you can certainly insert them in backwards and then have to re-do your work.
I am sure that if you follow these simple instructions and keep an eye on the diagram included with your new door knob you will have no problems you might even enjoy yourself doing some handyman work. My name is Cesar Batres. Through life I have had to learn how to do many things by myself instead of having someone do them for me. After many years of learning and doing I can say that I have saved a lot of money in the process and have also learned all kinds of useful things it is my desire to share these with you in simple easy to follow instructions.
Once done you will now see the inside of the wooden door and the part of the doorknob that goes through it. Push the opening and closing mechanism on the front of the door and at the same time pull the remaining piece of the door knob from the outside it will slide out easily leaving a hole that goes through the door. Once this is done take the opening and closing mechanism and slide it out the front of the door too. Now you have to reverse the process place the opening and closing mechanism through the front of the door make sure the flat side of the mechanism looks to the side to which the door opens.