Home / Door Knob / unbelievable bedroom door knobs genius inspirations / Exterior Door Knobs Walmart Exterior Door Knobs With Deadbolt Bedroom Door Knobs Glass Door Knob With Lock Interior Door Knobs Bulk
abrahamsson Door Knob May 16th, 2018 - 10:20:40
Does your door knobs open and close like they need to? Simply change the door knob it is simple and easy. Take a moment to stop and take into account how many times your doors get closed and opened every day.Most of us go in and out our door many times day-after-day and its common for your door knobs to get worn out and need to get exchanged. Anyone can certainly replace the door knobs inside of their home by using a screwdriver as well as a very little patience; here is some good information regarding how to make all your doors open and close easily.
Look at the base of the knob close to the door itself and you will see a small hole with a little separation inside of it. Take a key like piece of metal that is included in the new doorknob set and put it in the small hole prying it open. Pull the door knob out as you pry the hole until it comes out completely. You will have removed the decorative part of the mechanism and the operative part will be exposed. Against the door itself you will see a round piece of metal which is held in place by two large screws remove these screws all the way.
Always make sure you read about antique glass knobs or consult a friend or person who knows about antique knobs. Antique knobs enhance the look of your door and last a lifetime. Dont think for a second that such a choice is outdated or out of fashion. The truth is that such things will never be out of fashion for the simple reason that they will always look amazing if they are used in the correct environment. They look fabulous and you all know it so get yourselves out there and make that special purchase for your own doors.
Once done you will now see the inside of the wooden door and the part of the doorknob that goes through it. Push the opening and closing mechanism on the front of the door and at the same time pull the remaining piece of the door knob from the outside it will slide out easily leaving a hole that goes through the door. Once this is done take the opening and closing mechanism and slide it out the front of the door too. Now you have to reverse the process place the opening and closing mechanism through the front of the door make sure the flat side of the mechanism looks to the side to which the door opens.