abrahamsson Door Knob May 16th, 2018 - 10:17:09
This is a simple guide to changing a damaged door knob at home. Carpenters charge by the hour and you also have to wait in line for them to have time to come and do what you need. Follow these simple instructions and you can get rid of that bothersome door knob that sticks or does not work anymore in a few minutes without breaking a sweat. This guide applies to standard knobs which are found all over your house if you want to change the front door knob well that is a different story which we will deal with on a separate article.
If the door opens outwards the flat side should look outwards too if it opens to the inside the flat side should look inwards. Now slip in the cylinder through the door knob hole while holding the opening and closing mechanism pushed in so that it fits into the space provided for it in the door knob cylinder. Find the two large screws and the metal cover that go on the inside and screw it in place. Make sure it is tight but not overly tight. Test this by tuning the outside knob the opening and closing mechanism should retract without resistance.
They also will be getting a lot more wear and tear on an outside door and may not be strong enough to handle it. Its not just door knobs but there are also handles that can replace a door knob to give you door a little different look. The sliding door handles have a more industrial look. If you are creating a home with a modern décor motif these may be just the pieces you are looking for. An added bonus of the door handle door knob varieties is that for some they are easier to open. As many people age they have limited mobility in their hands from arthritis or other muscle reducing ailments. Sometimes grabbing a hold of a normal door knob and turning it is a difficult proposition. But with a sliding door handle its much easier to open a door just push the handle down and the door pops open. Even if they have limited hand mobility these doors can be opened by just leaning on the handle to trigger the mechanism.
Also a good resistive structure is needed. Deadbolts are used along with exterior door levers. We have to pull out these deadbolts latches if we want to replace the knob. Interior knobs have a basic structure somewhat simpler than an exterior knobs properties so they are simpler to replace. The main screws need to be removed first using a screwdriver. Then the two knobs on each direction will automatically come out. After that faceplate screws on the edges need to be taken out to remove the latching parts. Then the main plate needs to be taken out removing the anchor screws. These are the basic tasks to remove a door knob. Then the question of installing the new door knob arrives.