abrahamsson Door Knob May 16th, 2018 - 10:08:42
So they need to have a proper security system to maintain safety measures of the house. This is why manufacturers design exterior door knobs differently. However inside lever knobs are free from these concerns. When we choose inside door knobs we have to look properly at the rooms condition. This is important because if we want to use the knobs for our bedroom we will have to ensure a locking system which could be unlocked from inside only and in the case of emergence from the outside with a special key. There are privacy door knobs available for this purpose.
The first thing to do is to go out and get the new door knob pick the one you like even if it is different to the ones you already have around the house. The mechanism in all of them works in much the same way and their fit on the door is standard. You will need a flat and a Phillips screw driver ( the Phillips screw driver is the one that has a round star shaped tip) and maybe a small hammer. The process of changing the door knob is simple and easy to do because all you will be doing is exchanging one for the other.
Other important features for inside knobs are making the room appealing using the right type of metal and suitability for the user. This means when we purchase an inside door knob we will have to purchase it by seeing its matching properties with the room. Metal like brass chrome or nickel used for manufacturing the knob is also very important. There are also some other types of inside door knobs available. Most important is the passage knobs. These are used in large buildings often to make use of its simple locking system.
Also a good resistive structure is needed. Deadbolts are used along with exterior door levers. We have to pull out these deadbolts latches if we want to replace the knob. Interior knobs have a basic structure somewhat simpler than an exterior knobs properties so they are simpler to replace. The main screws need to be removed first using a screwdriver. Then the two knobs on each direction will automatically come out. After that faceplate screws on the edges need to be taken out to remove the latching parts. Then the main plate needs to be taken out removing the anchor screws. These are the basic tasks to remove a door knob. Then the question of installing the new door knob arrives.