abrahamsson Door Knob December 21st, 2017 - 10:20:57
Soon a lock would be added to a door. That made not only a way to keep the door from accidentally opening but also a way to intentionally keep people out. That wasnt enough for some people who could bust through a simple lock so there had to be more substantial locks created. Dead bolts were added to really hold a door shut when the person inside wanted it to stay that way. At one point there were very limited selections if you wanted a door with locks and even more limited selections if you wanted the additional dead bolt lock that matched the door knob.
It takes a while to gape at these shimmering beauties. Antique glass door knobs with their clean cut designs of crystal and cut glass are a sight words cant describe. The attention to detail and intricate patterns shaped into a dream is a pure exhibition of flawless workmanship. Antique glass knobs complement different types of doors and add to the décor of the door. Antique glass door knobs are becoming increasingly popular for the class and degree of sophistication they bring. Individuals are getting their doors customized in accordance with the type of antique glass door knobs.
Also a good resistive structure is needed. Deadbolts are used along with exterior door levers. We have to pull out these deadbolts latches if we want to replace the knob. Interior knobs have a basic structure somewhat simpler than an exterior knobs properties so they are simpler to replace. The main screws need to be removed first using a screwdriver. Then the two knobs on each direction will automatically come out. After that faceplate screws on the edges need to be taken out to remove the latching parts. Then the main plate needs to be taken out removing the anchor screws. These are the basic tasks to remove a door knob. Then the question of installing the new door knob arrives.
Once done you will now see the inside of the wooden door and the part of the doorknob that goes through it. Push the opening and closing mechanism on the front of the door and at the same time pull the remaining piece of the door knob from the outside it will slide out easily leaving a hole that goes through the door. Once this is done take the opening and closing mechanism and slide it out the front of the door too. Now you have to reverse the process place the opening and closing mechanism through the front of the door make sure the flat side of the mechanism looks to the side to which the door opens.